Bride à filet (Flange à filet) ye

Pipe flange threaded-a bɛ fɔ fana ko ascrewed flange-bɛ baara kɛ ni kɔnɔna jiri ye (tapped bore) walasa ka jɛɲɔgɔnya kɛ ni kɛnɛma pipe thread ye, ka degun-jὲɲɔgɔnya sirilen dɔ Dabɔ ni welding si tɛ. O b’a to a ka ɲi kosɛbɛ-bore layini misɛnninw ma, baara funteni bɛ dan yɔrɔ minnu na, sigili ka kan ka teliya, walima waati ni waati, u bɛ makɔnɔn.

Baarakɛcogo minnu bɛ kɛ cogoya la, olu ye nafamafɛnw ye, minɛnw ta-bɔli, waati dɔɔnin ɲɔgɔndanw-dasiyɔnw, ani degun dɔgɔya-ka se{3}}dantigɛli siratigɛw ma. Octal Pipe bɛ carbone steel, alloy steel, and stainless steel threaded flanges(ie,stainless steel threaded pipe flange) dilan ka kɛɲɛ ni hakɛba ye ani kalasi, o la, hakɛ minnu bɛ fɔ kosɛbɛ i n’a fɔ2′′ threaded flangeand4′′ threaded flange.

Yɔrɔ min na flansɛw minnu bɛ ni jiri ye, olu ka fisa ni tɔw ye

• Welding / hot permis tɛ wajibiya
• Lajɛ teliya la ni sigilanw ye minnu bɛ kɛ ka kɛɲɛ ni sariya ye (PTFE kasɛti walima anaerobic) .
• Ladonni nɔgɔya ani a caman cili
• Sugandili ɲuman pipe galvanisé walima coté ye yɔrɔ min na welding man ɲi

Ladilikanw dilancogo (injiniyɛri ka tiɲɛni) .

• A man ɲi ni yɛrɛyɛrɛ jugumanba ye, ni sɔgɔsɔgɔninjɛ doni ye, walima ni funteni cycle belebele ye
• A ka c’a la, a dan ye tansiyɔn dɔgɔman–danma ye ani foro misɛnninw (Klasi 150/300 ka ca kosɛbɛ) .
• Sigilan dafalen bɛ bɔ jiri cogoya ɲuman na (NPT/BSP) ani make-up torque/sealant bɛnnen

• Bride standard: 1 .ASME B16.5 (Pipe Brides ani Bride Fittings) .
• Filɛri sariyaw:

NPT (tapered): ASME/ANSI B1.20.1
BSPT (min bɛ kɛ ni fɛn ye): ISO 7-1 / EN 10226
BSPP (paralɛli): ISO 228-1
Octal bɛ timbre jɛlen kɛ jiri suguya (NPT / BSPT / BSPP) walasa ka a yɛrɛ tanga yɔrɔ ɲagami-ups ma ani ka gauge sɛgɛsɛgɛli sabati sɛnɛko la.

• Bride Filé Standard (Bride Visée):Bore tapped tilennen; a bɛ di RF (ɲɛda kɔrɔtalen) walima FF (ɲɛda fla) la.
• Bride Réducteur Fillé:A bɛ jiribolo fitinin dɔ fara ɲɔgɔn kan flansɛ belebeleba dɔ kɔnɔ OD-a bɛ yɔrɔ ni dɔgɔyalan danfaralen dɔ kisi (flansi min bɛ jiriw dɔgɔya).
• Bride blind tapped:A blind flange drilled & tapped ni kɔnɔna jiriw ye fiɲɛbɔyɔrɔw, jibolisiraw, walima minɛnw ɲɔgɔndanw kama (tapped blind flange).
• NPT vs BSP ka ɲɛsin sigicogo ma:
• NPT / BSPT (min bɛ kɛ ni nɛgɛ ye): .Sigili fɔlɔ bɛ kɛ ni jiriw ka ɲɔgɔndɛmɛ ye; aw bɛ PTFE kaseti walima jilama sirilan kɛ.
• BSPP (paralɛli): 1.1.Sigilanw ni gazi/O-ring; baara bɛ kɛ ni a ye yɔrɔ minnu na baarakɛcogo kura ni a ɲɛsincogo nafa ka bon.
• Facing suguyaw:

RF (a ka ca kosɛbɛ), FF (nɛgɛ walima fibreglasi minɛnw kama), RTJ ni ɲinini kɛra baara kɛrɛnkɛrɛnnenw kama.

• Hakɛ minnu bɛ fɔ kosɛbɛ:2′′ jirisunw ni 4′′ jirisunw bɛ mara tuma caman na izini nafamafɛnw ni skidw kama.
• Fɛn kɛrɛnkɛrɛnnenw:PVC threaded flange bɛ sɔrɔ tansiyɔn dɔgɔman-sitɛmuw kama, minnu tɛ{1}}nɛgɛ ye (a dilannikɛla ka sariya; ASME B16.5 nɛgɛ tɛ).

• Bonya hakɛ:1⁄2′′ – 24′′ (DN15–DN600) ; bore fitinin A ka dɔgɔn walima a bɛ bɛn 4′′ ma a ka ca a la
• Degun kalanw:Kalanso 150, 300 (kalasi sanfɛtaw i n’a fɔ 600 ni ɲinini kɛra, ka kɛɲɛ ni baara lajɛ ye)
• Facing:RF, FF, RTJ (a kɛcogo danma ni jiri ye ka da degun jateminɛw kan)

• Nɛgɛ min bɛ kɛ ni carbone ye:ASTM A105 (lamini), A350 LF2 (funteni dɔgɔman-), A694 F52–F70 (sɛnɛba-sɛnɛfɛnw pibiliki baara kama)
• Inox (Bride fileté en acier inoxydable):ASTM A182 F304/F304L, F316/F316L, F321, F347 ye baara kɛ ni a ye
• Alliage & Haute-Temp: Bamako, Mali.ASTM A182 F11, F22, F91 (chrome-moly ka ɲɛsin funteni wulilen ma)
• Duplex & Super Duplex: Bamako, Mali.ASTM A182 F51 (2205), F53 (2507), F55 ka ɲɛsin kulori-nafama ni kɔgɔjida la baara ma
• Sugandili min tɛ{0}}nɛgɛ ye:PVC threaded flange for low-tansiyɔn, ji sɔgɔlen walima kemikɛli nafama layiniw (non-ASME nɛgɛ)

Corrosion lakanani / finiw

• CS: tulu nɛrɛma, zinki-dalen, funteni-dip galvanized, FBE ni ɲinini kɛra
• SS: pickled & passivé; EP optionnel ka ɲɛsin baara saniyalen ma
• PTFE / lastikuw bɛ se ka kɛ ka ɲɛsin fɛn kɛrɛnkɛrɛnnenw ma minnu bɛ sɔgɔsɔgɔ

• Weld-fura sigili labɛnni:Octal Pipe threaded flanges bɛ dilan walasa ka bololanɛgɛ tilennenw kɛ, ka baara funteni ban ani ka yɔrɔ farati ni jɔli waati dɔgɔya.
• Compact, small-bore dɔnniya:A ka ɲi kosɛbɛ pibiliki sira sirilenw na, minɛnw bilayɔrɔw, ani modulu skids yɔrɔ minnu na yɔrɔ ka dɔgɔ.
• Ladonni-terikɛ dilancogo:Flansɛw bɛ se ka bɔ joona walima ka u falen k’a sɔrɔ u ma pibilikiw tigɛ, o bɛ dɔ bɔ baara tiɲɛniw na.
• Material & standards sɛgɛsɛgɛli:A bɛ sɔrɔ nɛgɛ karɔbɔli, nɛgɛ min tɛ sɔgɔ, ani duplex grades la, min bɛ bɛn API, ASME, PED, ani ISO ma, izini ɲinini suguya caman kama.
• Flexible, poroze-aligned production:Fɛn dilanni bolodara ka da kiliyanw ka poroze waatibolodalenw kan, ka a to flansɛw dili waati bɛnnen na, u bonya ni u ka kalasi suguya caman na.
• Lakanali foroko minnu bɛ kɛ:Flansɛw bɛ datugu ni tulu ye min bɛ se ka sɔgɔsɔgɔ, ka u datugu ni plastiki pibiliki dawolo ye, ka u pake ka ɲɛ walasa u ka se ka se ka sigi.

• Forging & Funteni furakɛli:Forged blanks ni sumanw bolicogo kɔrɔsilen; normalisé/Q&T/solution année ka spec.
• Masiniw kɛcogo tigitigi:CNC fini don bore, jiriw, PCD, ani ɲɛda la (RF 125–250 AARH; RTJ grooves per ASME).
• Thread Sɛgɛsɛgɛli:100% gauging ka ASME B1.20.1 (NPT) / ISO 7-1 / ISO 228 (BSPT/BSPP) Kalanjɛ ni sɛbɛnni: kalanjɛ ni sɛbɛnni gafew.
• NDT & Tansiyɔn sɛgɛsɛgɛliw:UT/MT/PT i n’a fɔ a ɲɛfɔlen don cogo min na; ji sɛgɛsɛgɛli bɛ sɔrɔ ni ɲinini kɛra lajɛw kama.
• Sɛbɛnw:MTRw (EN 10204 3.1/3.2), funteni ɲinini, mɔgɔ sabanan-sɛgɛsɛgɛli (BV/SGS/TÜV) ɲinini senfɛ.

• Nafamafɛnw : fiɲɛ, azote, watara ɲinini, jiko baarakɛyɔrɔw
• Minɛnw ka jɛgɛn-ups ani -bore processus tie-ins fitininw
• Furakɛcogo minnu bɛ kɛ ka furakɛli kɛ ani ka tɛmɛsira kɛ waati dɔɔni kɔnɔ
• Tasuma-ji bolofara ɲɔgɔndanw (ni kalasi/ɲɛda bɛ bɛn sistɛm ma)
• Baarakɛyɔrɔ minnu bɛ funteni dɔgɔya- (LF2) ani minnu bɛ kɛ ni sɔgɔli ye (316L, duplex) .

• Sariya:ASME B16.5 (a bɛ kɛ ni jiri ye) .
• Filɛriw:NPT, BSPT, BSPP ye baara kɛ
• Bonya: 1 .1⁄2′′ – 24′′ (2′′ & 4′′ brides threaded minnu bɛ sɔrɔ tuma caman na)
• Kalanso minnu bɛ kɛ:150 / 300 (600 ni ɲinini kɛra) .
• Ɲɛda minnu bɛ yen:RF / FF / RTJ ye baara kɛ
• A suguyaw:Standard threaded, threaded reducing flange, flange fiyentɔ tapped
• Fɛn minnu bɛ kɛ ka baara kɛ:CS (A105/A350 LF2), SS (F304/F316), Alɛri, Duplex, ani a bɛ kɛ cogo min na; PVC threaded flange for low-pressure non-nɛgɛ sigidaw

1.Hakɛ, NPS, Degun Kalasi (misali la, 2′′, Kalasi 300)
2.Thread Form (NPT / BSPT / BSPP) ani bololabaara ni kɛrɛnkɛrɛnnenya la
3.Facing (RF / FF / RTJ) ani gasket suguya ni a dɔnna
4.Materiel Grade (A105, LF2, F316L, F22, F51, wdfl) .
5.Sɛgɛsɛgɛli wajibiyalenw (NDT, hydro, 3ème-parti) .
6.Finish/Coating (galvanisation, pasivation, FBE) 1. Bamako, Mali.
7.Any specials: threaded reducing flange, tapped fiyentɔ flange, penti kulɛri, taamasiyɛn, pake

Sɛbɛnw (certifications) minnu bɛ sɔrɔ

 

CE ka Seereyaw

ISO 9001 ka seereyaw

API Q1 Seereyaw

ABS ka Seereyaw

AP-5L ka seereyaw

API-5CT ka seereyaw

 

Tags hot .: threaded flange, Sinuwa threaded flange dilannikɛlaw, feerekɛlaw, izini